※ The machine is initially set up at the factory. Please contact your reseller first before making any changes to the settings of the machine.
※ Only carbide and diamond tools can be calibrated. Do not calibrate tools such as endmill and cutter.
※ Be sure to unlock the pressure lock when calibrating the machine. Nose, tool and material can be damaged if the head is fixed or when the pressure lock is locked.
 |
Laser pointer | Pointer On/Off | Laser pointer On/Off | |
| Pointer Calibration | Set laser pointer calibration | |||
 |
Origin | Origin change (Short press button) |
Current tool location | • Another location: Move to the origin • Origin: Move to the another origin (Center ↔ Left-top origin) |
| Origin save (Press and hold button for more than 5 seconds) |
Save the current position as the origin. | |||
 |
Auto focus | Touch sensor -Tool Calibration- (Press and hold button for more than 5 seconds) |
Adjusts touch sensor settings | |
- 1. Touch Sensor (Tool Calibration)
- 2 Laser Pointer Calibration
- 3 Saving Multi-performance Clamp Origin Position
- 4 Camera calibration