¶ Contents
- 1. Safety Precautions for Electrical System
- 2. Safety precautions for installation
- 3. General precautions
- 4. Safety precautions for using the machine
- Please follow the necessary safety precautions to prevent injury and/or machine damage.
- Please read carefully and understand the instructions below for proper and safe use of the machine.
- Failure to follow these instructions may result in machine damage or physical harm.
 |
Failure to follow these instructions may result to machine damage. |
 |
Failure to follow these instructions may result to physical injury or harm. |
¶ 1. Safety Precautions for Electrical System
| Safety Precautions for Electrical System | |
|---|---|
|
Do not use a damaged power cord or a loose electrical outlet. This may cause electric shock or fire. |
|
Do not plug in two or more devices in a single outlet simultaneously. Overloading your plug sockets may lead to overheating which may cause fire. |
|
Do not pull a plug by the cord. Do not grab a plug with wet hands. This may cause electric shock and burns. |
|
To disconnect the AC adapter from the product, first Turn off the machine and then unplug the AC adapter. |
|
If smoke comes out of the machine, switch off the machine immediately. Do not attempt to repair and/or disassemble the machine, contact our authorized technical support for immediate diagnosis and repair. |
|
This machine is designed to operate on a power supply of 100 to 240 volts. The device will not work correctly if you use a non-AC power source. |
|
Unplug the machine when not in use |
|
Plug the machine into a grounded outlet only. The machine may fail if plugged into an ungrounded outlet, causing property damage, physical injuries, electric shock or fire. |
¶ 2. Safety precautions for installation
| Safety precautions for installation | |
|---|---|
|
Be sure to place the machine on a firm, flat and level surface. If the machine is not properly installed or placed, the machine may fall, causing physical injury, electric shock or fire. |
|
Do not put any foreign objects or any fire hazards on the machine. Never put the machine near or above any heating devices or any flammable materials. |
|
If there is smoke, moisture, oil, dust or water in the place where the machine is installed, do not use the machine. This may cause electric shock or fire. |
|
When installing the product, make sure there is enough space at the back for proper ventilation. If you don't, the product might not work right or get damaged. |
¶ 3. General precautions
| General precautions | |
|---|---|
|
Be sure to keep the machine out of children’s reach and sight. Children’s curiosity may lead to injury. |
|
Avoid spilling water or any liquids on the machine. This may result to machine failure and damage, causing electric shock or fire. If any liquids or foreign objects gets inside the machine, the machine may vibrate excessively then fall. This may cause injury. |
|
In the event that the product is used in a manner that does not comply with the specified regulations, the product warranty may become invalid. |
|
Please check that the product works and performs well before using it. |
|
Be sure that the machine is placed and kept in a room temperature. If the temperature drops below freezing, the machine may not work properly. |
|
Users must operate the machine properly and strictly follow all safety precautions. We are not responsible for any product damage, malfunction, or personal injury resulting from misuse, mishandling, or improper care. |
|
Although the product is calibrated as accurately as possible before shipment, a margin of error of less than ±1% may still occur. |
|
Minor scratches can occur during production. This is not a product defect, so you cannot return or exchange it. |
¶ 4. Safety precautions for using the machine
|
 |
Always wear safety glasses, a dust mask, and protective gloves when operating the machine. Fine dust and fumes generated during the engraving process may cause eye or respiratory irritation. Contact with hot or sharp surfaces may result in hand injuries. |
 |
||
|
 |
Protect your hands, wrists and fingers. Do not let any of your body parts or any foreign objects get caught in the machine during operation. The tools of the machine are sharp, and may cause serious physical injury. |
|
 |
Laser Radiation Avoid eye or skin exposure to direct or scattered radiation. |
|
 |
Keep hands and fingers away from the moving parts during operation. Getting caught in the machine's axis may cause serious injury. |
|
In order to prepare for an emergency, in case of a sudden machine malfunction or failure, users are strictly advised to not leave the machine unattended while in operation. Users should refrain from engaging in any activity that diverts his/her attention while actually engaged in operating the machine. |
|
|
Do not disassemble or modify the internal components of the machine. This may result in fire, electric shock, or equipment failure. For inspection, adjustment, or repair, please contact the place of purchase or an authorized authorized technical support. |
|
|
Be sure to have a fire extinguisher readily available before starting any work. | |
|
It is recommended to use a dust collector to remove particles generated during engraving. | |
|
Ensure adequate ventilation when operating the machine. | |
|
Do not lean on the product or load it with heavy objects. | |
|
Depending on the material (pure silver), there may be differences in performance and quality in terms of marking and cutting. | |