¶ 1. Package Contents
MAGIC-L3 Prime provides the following tools and devices. The contents of the package may vary if optional items are purchased.
Take note:
*Make sure to replace laser source regularly or as per maintenance schedule.
*All pictures shown are for illustration purpose only. Images may differ from the actual products.
*Be sure to use a safety mask and safety glasses to avoid injury during machine operation.
|
Name |
Picture |
Qty |
Usage |
|
L3 Prime |
 |
1EA |
Laser marking&cutting machine |
|
Power adapter (EW-20) |
 |
1EA |
Power supply ※Use a grounded outlet only. Do not plug the machine into an ungrounded outlet. |
|
USB Cable (EE-13) |
 |
1EA |
For connecting to PC |
|
Program Installation USB |
 |
1EA |
To install MagicEngrave software ※See program installation for further details. |
|
Quick manual |
 |
1EA |
Operating manual |
|
Clamp (CL-22) |
 |
1SET |
Support for material positioning. |
|
Clamp Bolt (M5-12mm) (TL-512N) |
 |
4EA | To fasten the clamp. |
|
L-wrench (4mm) (CO-L40) |
 |
1EA |
For tightening/replacement of bolt. |
|
L-wrench(3mm) (CO-L30) |
|
1EA |
For setting the focus pointer. |
|
L-wrench (2mm) (CO-L20) |
|
1EA | For setting the focus pointer. |
|
Ruler (CO-22) |
 |
1EA |
For measuring the material. |
|
Clamp Pin (6Ø)(RP-0615) |
 |
2EA | To secure the medal clamp. |
¶ Optional
*Purchased separately
|
Name |
Picture |
Qty |
Usage |
|
Air assist nozzle (CL-23) |
 |
1EA | Air nozzle with a flow control lever |
|
Auto tilt Rotary Clamp (CL-15) |
 |
1SET |
For holding ring materials in place. ※4mm chuck finger is included. |
|
Medal Clamp (CL-16) |
 |
1SET |
For holding materials with various shapes in place. |
|
Medal Clamp (Center fixing type) (CL-17) |
 |
1SET |
For holding materials with various shapes in place. |
|
Anti-Curling Clamp (CL-18) |
 |
1EA |
For holding a thin plate in place. |
|
Auto-tilting bangle clamp |
 |
1EA |
Bangle material fixing clamp |
|
L type clamp (CL-20) |
 |
1EA |
For holding materials with various shapes in place. |
|
Honeycomb Table (CL-21) |
 |
1SET |
For holding materials in place during cutting process. |
| Pen clamp (LMC-171) |
 |
1SET |
Multi-Pen engraving clamp |
|
Signet ring adapter (LMC-164) |
 |
1SET |
Adapter for aligning signet rings for engraving. |
|
Blower Box (CL-100) |
 |
1SET |
Exhaust for dust & smoke. ※ Using a dust collector or blower rated over 2A may cause machine malfunction. Do not connect or use products that exceed 2A. |
|
Auxiliary Power Device (LMC-101) |
 |
1SET |
Auxiliary Power Device must be used if the external blowers or dust collectorshave more than 2 Ampere. |
※All pictures shown are for illustration purposes only. Images may differ from the actual products.
¶ 2. Specifications
| Model | L3 Prime-60W | L3 Prime-100W | ||
| Laser safety classification | Class 1 | |||
|
Dimensions |
394 mm(W) × 577 mm(H) × 609 mm(D)/ 15.5in × 22.7in × 24in | |||
|
Max. engraving area |
110mm x 110mm / 4.3in x 4.3in | |||
| Maximum material height | 100mm / 4in | |||
| Maximum Z-axis height | 100mm / 4in | |||
|
Effective space inside the chamber |
350 mm(W) x 170 mm(D) x 100 mm(H) / 13.7 in(W) x 6.7 in(D) x 4 in(H) | |||
|
Safety cover height (When open) |
266 mm / 10.5 in (From base plate) | |||
|
Maximum material weight |
20kg (44 lbs) | |||
| Weight | 50kg (110 lbs) | 54kg (119 lbs) | ||
| Power consumption | 520W | 730W | ||
|
Cooling system |
Air-cooling type | |||
|
Camera |
13MP | |||
| Frequency | 50/60Hz | |||
|
Operating voltage |
AC 100~240V | |||
|
Blower power port |
100~220V/2A ※ Auxiliary Power Device must be used if the external blowers or dust collectors have more than 2 Ampere. |
|||
|
Temperature |
0 – 40 ℃ | |||
|
Humidity |
10 - 85% | |||
|
Purposes |
Metal engraving & cutting, Pen engraving, Ring engraving (inside), Ring engraving (outside), etc. | |||