2. Safety Precautions on Machine Operation

	Be sure to use goggles to prevent eye injury from metal chips and dusts. Use a safety mask to prevent exposure from inhalable elements and particles.
	Protect your fingers, hands and wrists during operation. The engraving cutter of the machine is sharp and may cause cuts and/or serious injuries if get caught in between the axis.
	Be sure to use a dust collector to remove the particles produced during engraving process. Debris like metal chips and dusts may cause serious eye injury if they get stuck in the eye, and may cause respiratory problems if inhaled.
	Do not put any foreign objects or any fire hazards on the machine. Never put the machine near or above any heating devices or any flammable materials.
	Be sure to place the machine on a firm, flat and level surface. If the machine is not properly installed or placed, the machine may fall, causing physical injury, electric shock or fire.
	Be sure to keep the machine out of children’s reach and sight. Children’s curiosity may lead to injury.
	Do not disassemble, assemble or modify the machine. This can lead to machine failure and damage, causing fire or electric shock. Please contact our technical support for proper diagnosis and inspection, calibration, and repair.
	Avoid spilling water or any liquids on the machine. This may result to machine failure and damage, causing electric shock or fire. If any liquids or foreign objects gets inside the machine, the machine may vibrate excessively then fall. This may cause injury.
	Use the machine properly and strictly follow the safety precautions. We will not be held responsible for any damages or injuries caused by mishandling or misuse of the machine.
	Avoid using materials that may get caught or jammed in the machine. The engraving and cutting performance and quality of the machine may vary depending on the materials used.