¶ 1. Package Contents
MAGIC-L3 provides the following tools and devices. The contents of the package may vary if optional items are purchased.
Take note:
*Make sure to replace laser source regularly or as per maintenance schedule.
*All pictures shown are for illustration purpose only. Images may differ from the actual products.
*Be sure to use a safety mask and safety glasses to avoid injury during machine operation.
|
Name |
Picture |
Qty |
Usage |
|
MAGIC™-L3 |
 |
1EA |
Laser marking machine |
|
Power adapter (CP-02) |
 |
1EA |
Power supply ※Use a grounded outlet only. Do not plug the machine into an ungrounded outlet. |
|
USB Cable (CP-11) |
 |
1EA |
For connecting to PC |
|
Program Installation USB |
 |
1EA |
To install MagicEngrave software ※See program installation for further details. |
|
User Manual |
 |
1EA |
Operating manual |
|
Clamp (LMB-21) |
 |
1SET |
Support for material positioning. |
|
Clamp Bolt (M5-12mm) (LMB-21B) |
 |
4EA | To fasten the clamp. |
|
L-wrench (4mm) (CP-L40) |
 |
1EA |
For tightening/replacement of bolt. |
|
L-wrench(3mm) (CP-L30) |
|
1EA |
For setting the focus pointer. |
|
L-wrench (2mm) (CP-L20) |
|
1EA | For setting the focus pointer. |
|
Ruler (CP-24) |
 |
1EA |
For measuring the material. |
|
Clamp Pin (6Ø)(LMC-11) |
 |
2EA | To secure the medal clamp. |
¶ Optional
*Purchased separately
|
Name |
Picture |
Qty |
Usage |
|
Power Cable (Right angled) |
 |
1EA |
Power supply ※Use a grounded outlet only. Do not plug the machine into an ungrounded outlet. |
|
USB Extension Cable (Left angled) (LMC-36) |
 |
1EA |
For connecting to PC |
|
Back cover (LMC-253) |
 |
1EA |
For protecting the port from scratches. ※Use the power cable (Right angled) and USB cable (Left angled). |
|
Medal Clamp (LMB-102) |
 |
1SET |
For holding materials with various shapes in place. |
|
Medal Clamp (Center fixing type) (LMC-020) |
 |
1SET |
For holding materials with various shapes in place. |
|
L type clamp (LMB-101) |
 |
1EA |
For holding materials with various shapes in place. |
|
Auto tilt Rotary Clamp (LMC-161) |
 |
1SET |
For holding ring materials in place. ※4mm chuck finger is included. |
|
Auto-tilting bangle clamp |
 |
1EA |
Bangle material fixing clamp |
|
Honeycomb Table (LMC-071) |
 |
1SET |
For holding materials in place during cutting process. |
|
Anti-Curling Clamp (LMC-031) |
 |
1EA |
For holding a thin plate in place. |
|
Blower Box (LMC-200) |
 |
1SET |
Exhaust for dust & smoke. ※ Using a dust collector or blower rated over 2A may cause machine malfunction. Do not connect or use products that exceed 2A. |
|
Auxiliary Power Device (LMC-101) |
 |
1SET |
Auxiliary Power Device must be used if the external blowers or dust collectorshave more than 2 Ampere. |
※All pictures shown are for illustration purposes only. Images may differ from the actual products.
¶ 2. Specifications
| Model | L3-30W | |||
| Laser safety classification |
Class 1 |
|||
|
Dimensions |
404 mm(W) x 590 mm(D) x 556 mm(H) / 16 in(W) x 23 in(D) x 22 in(H) |
|||
|
Max. engraving area |
110mm x 110mm / 4.3in x 4.3in |
|||
| Maximum material height |
100mm / 3.94in |
|||
| Maximum Z-axis height |
100mm / 3.94in |
|||
|
Effective space inside the chamber |
350 mm(W) x 170 mm(D) x 100 mm(H) / 13.7 in(W) x 6.6 in(D) x 3.9 in(H) |
|||
|
Safety cover height (When open) |
266 mm / 10.4 in (From base plate) |
|||
|
Maximum material weight |
20kg |
|||
| Weight |
46kg |
|||
| Power consumption |
340W |
|||
|
Cooling system |
Air-cooling type |
|||
| Frequency |
50/60Hz |
|||
|
Operating voltage |
AC 100~240V |
|||
|
Blower power port |
100~220V/2A ※ Auxiliary Power Device must be used if the external blowers or dust collectors have more than 2 Ampere. |
|||
|
Temperature |
0 – 40 ℃ |
|||
|
Humidity |
10 - 90% |
|||
|
Purposes |
Metal engraving & cutting, Pen engraving, Ring engraving (inside), Ring engraving (outside), etc. |
|||