※Honeycomb table is sold separately.
- Measure the thickness of a material to be cut.
- Place the material on the honeycomb table then set the laser focus using the direction key (Z)
buttons.
- Click
[Text Input] button on the toolbar to enter the text input mode then click at any target area to enter text.
4. After entering the text, click 
[Selection] on the toolbar to select the text and designate the font.
Adjust the text according to the desired size. Use the object handle (shown in the picture below) or go to object property window.
- Drag with the mouse the text gap adjustment handle (shown in the picture below) to narrow or widen the gap between the characters.
If the gap in between each character is partially adjusted, click [Text Input] button then drag the mouse to select the characters. Drag the text gap adjustment handle with the mouse then adjust the gap.
- Insert a ring design that matches your characters from the design sample section.
*Design sample: Click
or [Menu] → [View] → [Design sample].
- Double-click the chosen ring design then designate its location on the work area.
8. [Copy] and [Paste] the ring design to reveal a guideline for the location of the ring. Adjust the location, then left-click with the mouse.
- Select all the objects, then right-click to see the menu then select [Group].
✽Select all objects: Drag the objects with the mouse or select [Menu] → [Edit] → [Select All].
- Upon completing the design, click
[Cut-Out Toolpath].
- Once the “Cut-Out” window appears (as seen in the figure below), select the tool to be used for cutting. Enter the material’s thickness and other options then click “Create Toolpath.”
- “Toolpath” is created.
- After creating the toolpath, set the laser marking option then click
button.
 |
Whenever the direction key is pressed, the laser pointer moves up/down/left/right, showing a marking area.
Check if the marking zone is matched with the area on the material to be actually marked. If unmatched, adjust the position, using the direction keys. The laser pointer automatically points to the area where marking takes place (based on the target location on the work area). When the direction key is pressed, the laser pointer moves to the area to be marked (left, top, right or bottom) from its target location. If the marking area needs to be adjusted to the left, press  key to move the pointer to the left.
 |
- After positioning the laser pointer and determining the location of the marking area, click [Start] button on the program or long-press [
] button on the machine (for more than 2 seconds) until the cover closes and the marking process begins.
· Repeat marking: Press and hold button to complete marking, then double-click button to repeat marking on the same material.
