¶ 1. Package Contents
JANUS provides the following tools and devices. The contents of the package may vary if optional items are purchased.
Take note:
*Make sure to replace laser source regularly or as per maintenance schedule.
*All pictures shown are for illustration purpose only. Images may differ from the actual products.
*Be sure to use a safety mask and safety glasses to avoid injury during machine operation.
|
Name |
Picture |
Qty |
Usage |
|
JANUS |
 |
1EA |
Laser & CNC dual machine |
|
Power Cable (CP-02) |
 |
1EA |
Power supply Do not plug the machine into an ungrounded outlet. |
|
USB Cable (CP-11) |
 |
1EA |
For connecting to PC |
|
Program Installation USB |
 |
1EA |
To install MagicEngrave software ※See program installation for further details. |
|
User Manual |
 |
1EA |
Operating manual |
|
T-wrench(2mm) (CP-T20) |
 |
1EA |
For tightening/unscrewing the bolt. |
|
L-wrench(3mm) (CP-L30) |
 |
1EA |
For setting the focus pointer and fixing the flat clamp guide. |
|
L-wrench (1.5mm) |
 |
1EA |
Tool for tightening/replacement of bolt. |
|
Ruler (CP-24) |
 |
1EA |
For measuring the material. |
|
Tool fixing bolt (M4x5) |
 |
3EA |
To fasten the spindle tool. |
|
L-tool fixing bolt (M3x4) |
 |
3EA |
To fasten the L-tool tip. |
|
Diamond tip(4Ø) (T40-DA22) |
 |
1EA |
For spindle: Tool used for engraving. |
|
Endmill cutter(4Ø) (T40-E06) |
 |
2EA |
For spindle: Tool used for cutting. |
|
Spindle belt (60Ø/60mm) (CP-SB60) |
 |
3EA |
For transferring DC motor’s rotation power to spindle. |
|
Finger chuck handle (CP-31) |
 |
2EA |
To fasten the rotary clamp. |
|
Flat finger chuck (CP-32) |
 |
3EA |
For holding rings in place when engraving the inside or outside. |
|
Round finger chuck (Wide width) (CP-33) |
 |
3EA |
For holding rings in place when engraving the inside or outside. |
|
Round finger chuck (Narrow width) (CP-34) |
 |
3EA |
For holding rings in place when engraving on the inside. |
|
Finger Chuck (4mm) (LMC-05-4) |
 |
3EA |
For holding rings in place when marking the inside or outside. |
|
Finger Chuck (2mm) (LMC-05-2) |
 |
3EA |
For holding thin rings in place when marking the inside or outside. |
|
Finger Skin (CP-41) |
 |
1SET |
For protecting finger chuck. |
|
Finger Chuck Spanner (CP-21) |
 |
1EA |
For tightening/unscrewing the finger chuck. |
|
Multi- performance Clamp (CM-50) |
 |
1EA |
To hold materials with different shapes in place. |
|
Flat clamp (CM-51) |
 |
1EA |
Flat plate clamp for laser processing. (Includes guide and bolts) |
|
Cutting clamp (CM-52) |
 |
1EA |
To firmly hold materials in place during cutting process. |
|
Tray |
 |
1EA |
Multi-purpose tray. |
|
Cutting nose(4Ø) (CP-243N) |
 |
1EA |
Attached to the head: To protect tools and to cut at specific depth. |
¶ Optional
*Purchased separately
|
Name |
Picture |
Qty |
Usage |
|
Blower Box (LMC-200) |
 |
1SET |
Exhaust for dust & smoke. ※ Using a dust collector or blower rated over 2A may cause machine malfunction. |
|
Pin clamp (CP-80) |
 |
1SET |
To hold materials with different shapes in place. |
|
Ring adapter (CP-241) |
 |
1SET |
For pen jig: To firmly hold rings in place when engraving the outside. |
|
Cutlery clamp (CP-83) |
 |
1SET |
To firmly hold spoons in place. |
|
Watch adapter (CP-84) |
 |
1SET |
To firmly hold watch in place. |
|
Bracelet adapter (CP-85) |
 |
1SET |
To firmly hold bracelets in place. |
|
Bar necklace adapter (CP-166) |
 |
1SET |
Jig for holding materials with narrow width (about 2-3mm) in place. (Used for securing pendants, bar necklaces, etc.) |
|
Brick adapter (CP-167) |
 |
1SET |
To firmly hold brick in place. |
|
Brick adapter (Shallow type) (CP-167S) |
 |
1SET |
To firmly hold brick in place. |
|
Curved tag adapter (CP-182) |
 |
1SET |
Jig for holding curved materials in place. (Used for securing curved pendants, chain bracelets, etc.) |
|
Anti-Curling Clamp (CM-53) |
 |
1EA |
For holding a thin plate in place. |
|
Pen jig (CM-54) |
 |
1EA |
For holding pens in place. (Includes 1 × Ø8 mm (0.31 in) pin for installation) |
※All pictures shown are for illustration purposes only. Images may differ from the actual products.
¶ 2. Specifications
|
Model |
Janus(MAGIC-JANUS) | |||
|
Laser safety classification |
Class 1 | |||
|
Dimensions |
550 mm(W) x 600 mm(D) x 530 mm(H) / 22 in(W) x 24 in(D) x 21 in(H) | |||
|
CNC |
Stroke |
240 mm(X) × 120 mm(Y) × 60 mm (Z) / 9.4 in(X) × 4.7 in(Y) × 2.3 in(Z) | ||
|
Head Configuration |
Tension head, probe (motor-driven), L-tool, spindle, DC motor, LED | |||
|
Spindle motor power |
37.9 W | |||
|
Work Area (Multipurpose Clamp) |
120 mm(X) × 100 mm(Y) × 60 mm (Z) / 4.7 in(X) × 3.9 in(Y) × 2.3 in(Z) | |||
|
Laser |
Stroke (Z-axis) |
80mm / 3.15in | ||
|
Laser Source |
30W mopa |
60W mopa |
||
|
Lens Working Distance (WD) |
165 mm / 6.50 in |
198 mm / 7.79 in |
||
|
Lens Working Area (X × Y) |
110 mm(X) × 110 mm(Y) / 4.33 in(X) × 4.33 in(Y) | |||
|
Work Area (Multipurpose Clamp) |
110 mm(X) × 110 mm(Y) × 73 mm (Z) / 4.33 in(X) × 4.33 in(Y) × 2.87 in(Z) |
110 mm(X) × 110 mm(Y) × 40 mm (Z) / 4.33 in(X) × 4.33 in(Y) × 1.57 in(Z) |
||
|
Rotary clamp |
0°~30° Tilting / Ring o Bangle o (Ø65mm or less) | |||
|
Weight |
70kg | |||
|
Power consumption |
<500W |
<600W |
||
|
Cooling system |
Air-cooling type | |||
|
Frequency |
50/60Hz | |||
|
Operating voltage |
AC 100~240V | |||
|
Blower Power Inlet |
100~220V/2A ※ Auxiliary Power Device must be used if the external blowers or dust collectors have more than 2 Ampere. |
|||
|
Temperature |
0 – 40 ℃ | |||
|
Humidity |
10 - 85 % | |||
|
Purposes |
Metal material marking and cutting, pen marking, and inner and outer diameter marking of metal rings. | |||