※ The machine is initially set up at the factory. Please contact your reseller first before making any changes to the settings of the machine.
※ Only carbide and diamond tools can be calibrated. Do not calibrate tools such as endmill and cutter.
※ Be sure to unlock the pressure lock when calibrating the machine. Nose, tool and material can be damaged if the head is fixed or when the pressure lock is locked.
 |
Tool change | 1. Change the tool: Short-press to change tool. 2. Probe calibration: Long-press (for more than 5 seconds) to adjust probe settings. |
|
Press the AF  button while pressing/holding the corresponding button. |
|||
  |
Pointer On/Off | Laser pointer On/Off | |
 |
Pointer calibration | Set laser pointer calibration | |
 / |
Change Origin | Current tool position | • Another position: Move to the origin • Origin: Move to a different origin (Center ↔ Left-top origin) |
 (more 3 seconds) |
Save Origin | Save the current position as the origin. | |
- 1. Touch Sensor (Tool Calibration)
- 2 Laser Pointer Calibration
- 3 Saving Multi-performance Clamp Origin Position
- 4 Camera calibration