What is Photo Marking?
Photo marking is a marking method that marks the shade of an image with dots.
- Measure the size and height of your material.
- Place your material at the center of the clamp.
- Select a template that matches the shape or type of your material from the template category. Enter the size of your material then click “OK” button.
| Maintain original size | The actual size of the registered template is loaded; not the size entered. |
| Locate to original position | The template is loaded to where it was initially created. If this option is selected, the template is loaded at the center of work area. |
| Fit page size to template | The size of the page is adjusted to the size of the template. |
¶ [Load image]
- Click
[Image] to import an image for marking.
- Adjust the size and location of the image.
- [Clipping Mask] feature enables clipping or cropping of the target image. Drag the mouse over the image then create a shape.
- Drag and hold the mouse to select the target image or select [Menu] → [Edit] → [Select All].
5. Then select [Menu] → [Transform] → [Make Clipping Mask]. Only the cropped image (target image) remains.
The original image is saved; not deleted or cropped out.
- Click
[Photo Impact Engraving Toolpath] button.
✽Click
button on the top right of the screen for immediate marking without creating a Toolpath.
- Adjust marking options in photo marking option window.
✽ The black area is not engraved; only the cropped image.
During photo marking process, the brighter area (white area) of an image is not visibly expressed with dots unlike the darker area where dots are highly visible with higher marking quality. Therefore, it is recommended to adjust the brightness of an image to darker. Normally, a dot ratio of 10-20% provides the best marking quality for a portrait. Take note that the image’s optimal conditions vary depending on the brightness of background of the image. Check image preview then adjust the image’s brightness and dot ratio. If ‘image adjustment’ is confusing, click “Recommend the best” button to automatically adjust the image.
- Click “OK” button to create a toolpath for photo marking. Set the marking option then click [Engraver] button.
During marking process, the white area of the image appears with dots. The image result of the toolpath is shown as a negative image.
- Once the tool is positioned to the center of the material and the laser pointer turns on, use the direction key buttons to position the laser pointer to the engraving area. The area that the laser pointer points to is where the actual engraving takes place.
 |
Press the direction key buttons to move the laser pointer to the left, top, right and bottom areas of the engraving area. (Long press to move the laser pointer farther). Check if the laser pointer points to the area on the material where you want to engrave. If the laser pointer is out of range, adjust the position using the direction keys.
The laser pointer automatically points to the area where marking takes place (based on the target location on the work area). When the direction key is pressed, the laser pointer moves to the area to be marked (left, top, right or bottom) from its target location. If the marking area needs to be adjusted to the left, press  key to move the pointer to the left.
 |
- After positioning the laser pointer and determining the location of the engraving area, long-press and hold
button (for more than 3 seconds) until it beeps to confirm that the machine is ready to engrave.